Almatis Logo

Market & Products / Polishing /  

Stones

Stones

Polishing of marble and granite are the most commom applications for stone polishing. Especially marble is soft and needs special attention already during the pre-polishing step. Target is to avoid defects in the surface structure in order to achieve a perfect surface in the finishing process.

Soft

RAPOL140

Alumina with SSA of 4m2/g and a top cut of 90μm for high cutting compounds for metal surfaces.?

RAPOL600

Alumina with SSA of 4,5m2/g and a top cut of 40μm for metal, paint and plastic application.?

RAPOL 100

Alumina with SSA of 3,5m2/g and a top cut of 200μm for high cutting compounds as well as aluminum surfaces.

RAPOL 500

Alumina with SSA of 4m2/g and a top cut of 63μm for metal, paint and plastic application. The next generation P2 product achieving higher cut and similar polishing result.?

P 6

Alumina with top cut of 125 μm produced in Germany for high cutting compounds.

P 2 FR

Alumina with top cut of 90 μm and fines removed. Due to removal of fine fraction the material has a high loose bulk density and oil absorption

A 13 -325

Alumina with top cut of 45 μm / 325 mesh, which can be used on all kinds of surfaces.

P 730

Alumina with top cut of 40 μm?and best cost-performance ratio for the finishing of all kinds of surfaces.

News & Events
捕鱼来了弹头价格表