For the finishing of metal products, Almatis supplies a broad portfolio with unique performance in the 3 -17m2/g surface area range. Almatis will customize optimum individual solutions for cutting, as well as for polishing and brightening.
With a range of production techniques, Almatis can tailor the particle size distribution to each customer’s requirements.
Special polishing alumina with a very tight controlled top cut of <20μm for high end finishing applications.
Alumina with SSA of 4,5m2/g and a top cut of 40μm for metal, paint and plastic application.?
Alumina with SSA of 4m2/g and a top cut of 63μm for metal, paint and plastic application. The next generation P2 product achieving higher cut and similar polishing result.?
Alumina with top cut of 90 μm produced in Germany. The "workhorse" in polishing industry giving high cut and good polish in on go.
Alumina with top cut of 45 μm / 325 mesh, which can be used on all kinds of surfaces.
Alumina with top cut of 40 μm?and best cost-performance ratio for the finishing of all kinds of surfaces.
Alumina with top cut of 20 μm giving nearly scratch free surfaces.